6 Plumbing Tips for Septic Tank Installation and Maintenance

6 Plumbing Tips for Septic Tank Installation and Maintenance

Installing a septic tank takes a lot of hard work. They need to be installed correctly and in a safe manner. A septic tank system needs to fit certain codes and standards that are enforced to decrease the risk of contamination. Once you have yours installed, you will need to maintain it for the best results.

6 Plumbing Tips for Septic Tank Installation and Maintenance

1. Schedule Cleaning

It does not matter if your septic tank is new or old, it will need to be pumped out every so often and given a good cleaning. It is recommended that you have the septic tank cleaned out every three to six years depending on usage. If you have a large family, the tank should be cleaned out more often than if a single person is living alone in the home.

Solids that don’t break down will also need to be removed from septic tanks. If the solids are left in the tank, they will lead to a build-up and blockage and the septic system will not work properly. If there are any leaks, they need to be fixed immediately. A small fix can turn into a big problem if it is ignored. Regular maintenance is crucial.

6 Plumbing Tips for Septic Tank Installation and Maintenance

2. Have Tests Done

To make sure that installing a septic system is a good choice for your property there are a number of soil tests that need to be performed. Before a septic tank is installed the grounds need to meet specific requirements. A soil evaluation will help determine the different types of septic tanks that can be used at your location and if a specific system is going to be needed. Before installing the tank, it is important to have a reputable company come out and test the soil before any digging starts. This can also help you determine the proper location for your septic tank.

6 Plumbing Tips for Septic Tank Installation and Maintenance

3. Remove the Old System

If replacing an older septic tank, the old one needs to be removed from the ground. Having a large empty tank under the ground can be dangerous and can also be a health issue. If there is any content, even liquid, that is left in the old tank, it can lead to contamination of the groundwater. Many states also require that old septic tanks that are no longer in use are removed or crushed. Some can be filled with gravel and drained. Be sure to find out any specific state requirements for the disassembly and removal of your old septic tank.

6 Plumbing Tips for Septic Tank Installation and Maintenance

4. Keep Heavy Items off the Tank

Many people use their yards to store heavy items such as boats and RVs when they are not in use. It is not a good idea to store these on top of your septic tank. Driving these heavy items over the tank or even the drain field can cause a lot of damage. The pressure from these heavier items can damage the pipes. In many places, this is also a violation of the law and local codes.

6 Plumbing Tips for Septic Tank Installation and Maintenance

5. Be Careful What You Flush

There are few things you can do in your home to help the septic system stay functioning in the proper order. Do not flush anything but toilet tissue down the pipes. Flushing anything else can lead to clogs in the tank, in the pipes, and even in the drain field. Dental floss, cigarette butts, feminine care products, and even tissues can lead to clogs. Keep in mind that the septic tank should not be used as a garbage disposal. There are maintenance products that you can buy that are specially designed for septic tank health. They can be put in the tank once a month to help break down bacteria and anything else that may be harmful.

6 Plumbing Tips for Septic Tank Installation and Maintenance

6. Take Care of the Outside Tank

It is advised to cut down trees and shrubs that are located in the drainage field. Make sure that roots are clear as well. Roots can damage the pipes as well as the septic tank under the ground. Gutters should be installed so that the rainwater flows away from the drainage area. This will help the area from getting overly saturated.

These are some tips on how to keep your septic system and your septic tank in proper working condition. These tips will help your septic tank last longer and will help prevent any large issues from happening in the future.

Location:

525 N Tryon St
Suite 1600
Charlotte, NC 28202

Follow Us